• Home
  • /Bioshield Technology


Biosheild Control Panel
  • Menu driven, digital interface with touch-pad for easy command initiation.
  • Incoming AC Voltage Monitor – Alarms when voltage falls outside factory set threshold.
  • Digitally displayed, resettable total operating hour meter.
  • Thermoplastic NEMA 12 enclosure.
  • Individual Lamp Status and Lamp Life Monitor – 72-hour reoccurring alarm triggered upon end-of-useful-lamplife (12,000  hours).
  • Power supply enclosure temperature sensor alarm – Protects internal components from temperatures exceeding 140˚F.
  • UV Intensity sensor alarm – Monitors UV intensity inside the reactor vessel and measures UV-C lamp output percent (1-100%).
  • Output Alarm Relay – 100mA, normally open “Form A” dry contact for enunciation of above alarm conditions to external  controller.


All NSF-50 BioShield UV system models feature our user-friendly, microprocessor-based controller/ monitor. This sophisticated  instrumentation features a menu-driven digital interface with touch pad controls for easy command initiation.


  • Water Flow Meter – to measure and display UV system
    water flow rate in either GPM or LPM.
  • Water pH Meter – features alarm set-point, anywhere
    on 0-10 pH scale.
  • Ethernet communications port – using supplied map of
    I/O, allows host controller to monitor individual alarm/
    lamp conditions via Modbus RTU protocol.
  • 4-20mA output port.


  • This field is for validation purposes and should be left unchanged.

** NOTE:  Quotations are approximates.  Exact quotes will be established once all speicifications are reviewed.